Damien at work
How to use vacuum forming for dessert molds as a pastry chef
At the time of this project, Damien Wager’s ‘day job’ is as Head of Pastry at the luxury Beechfield House Hotel near Bath. But that’s not all he does, Damien’s got his fingers in many pies (excuse the pun). He is a cookery teacher, consultant and brand ambassador for chocolate makers Valrhona and HEiH. He also teaches pastry making to both amateurs and professionals all over the UK and shares his edible creations with over 40,000 or so Instagram followers.
In 2020, Damien opened his first venue, Edible Art Patisserie in Cheltenham, with plans to launch further locations. He was alsoinvited into the Valrhona 'Cercle V' programme for 2020 and is an ambassador for Kenwood.
With every new dessert, Damien’s desire is to create something completely unique. He uses the FormBox to make innovative molds for chocolates, often based on fruit and other distinctively shaped objects, that he would not be able to make otherwise.
His latest creations — a life-like banana-shaped inverse banoffee pie and lime-shaped key lime pie — are made using FormBoxed molds which can be easily wiped clean and reused. Damien has also worked out that if he uses a food-safe low tack tape to line each mold, he can freeze the mousse and remove it from a mold without damaging either. We love to hear of new FormBox tips and tricks — so thanks for that, Damien! For him, the thicker the plastic, the better: that way it can take more of a beating.
Making the banana molds
How can the Mayku FormBox save pastry chefs and chocolatiers time and money?
Before the FormBox, Damien was very limited in what molds he could use. Almost all of them had to be ordered from manufacturers advertised in the back of specialist magazines, this meant other pastry chefs could purchase the same ones as him. In an industry in which customers are constantly looking for the new and unique, Damien had to work out how to create something that didn’t look like it had come straight out of a catalogue.
He tried molding desserts by hand, but they never looked like the real thing. Added to this was the fact that molds made to order from specialist manufacturers are expensive and take time to arrive. Damien has been quoted £4,000 and three months for an order of 20 custom molds — unsustainable for an operation his size.
Inverse banoffee pie
“You can make whatever you want: if you press a Yale key down into the mold, it will come out exactly the same!”
Increasing your creative scope with custom molds over off-the-shelf options
The FormBox has proved something of a revelation for Damien. First and foremost, it has led to a creative renaissance as, in Damien’s words, “you can make whatever you want: if you press a Yale key down into the mold, it will come out exactly the same!” After realising its potential, Damien says he went to shop after shop looking for objects to mold — “I can think of 40 different molds I’d love to make if I could only find the objects.”
It was empowering for Damien to make the custom molds himself — not only were his customers impressed, but he also knew that no other chef would have the same one. It also meant he could create a chocolate he’d always dreamed of making: a shell-shaped sea salted caramel number paying homage to his place of birth (Essex) and where he grew up (Cornwall).
In terms of speeding up the mold-making process, the FormBox has been a no-brainer. When he first took it out of the box, Damien, in his own words, “tried to do it all without the instructions, even though I’m useless with machinery.” Despite all of this, he had his first mold made and set within 15 minutes. As for the price, all things considered, it works out at about one-tenth of what Damien was quoted by the English and Belgian companies he initially contacted. Their molds came to about £32 a piece, which is around the price for a pack of 30 Mayku Form Sheets (which can make 30 molds). Damien’s pastry making classes are mixed ability, but now he doesn’t need to worry if someone smashes up one of his molds because they are affordable and he can just make another one in 15 minutes!
Key lime pie, as you've never seen
How does the Mayku FormBox compare to outsourcing custom mold making?
- Upfront Cost - £599
- Part Cost - £1
- Lead time - 3-4 hours
- Quantity - 30
External Mold Vendor
- Upfront Cost - £3-4,000
- Mold Cost - £32
- Lead time - 3 months
- Quantity - 2
Want to learn more? You can follow @TeamMayku on social media, join our Facebook Group, the Mayku Community or request to Speak to a Specialist at anytime to find out how you could use a FormBox for your next project.
How Milachocolata uses the FormBox to create custom chocolates for wholesale and bespoke orders
Makes • 7 minutes readRead Post
Making a custom chocolate iceberg mold with chocolatier Paul A. Young and the Mayku Multiplier
Makes • 5 minutes readRead Post
Industrial Design prototyping without outsourcing with the Mayku Multiplier
Makes • 5 minutes readRead Post
Ask a question
Want to know more? Send us a question and we’ll get back to you as soon as we can.Ask us a question
Book a chat
Want to learn how Mayku can help you? Book a call with one of our friendly maker experts.Talk to a specialist
Get a quote
Ready to buy? Talk to us to get pricing on the Multiplier or FormBox for your specific needs.Get a quote