Yes. With the Mayku Multiplier your lab can pressure form aligners, retainers, night guards and bleaching trays in-house: up to 20 appliances per pull on one 428 mm sheet, or up to 7 on the included 7-Shot Reducing Plate (about 4 minutes per pull for PETG retainers). The Dental Bundle is $11,999 excluding taxes and shipping.
A large-format pressure former with an auto-levelling system, built-in compressor, and open-material compatibility. Three things make it different.
Up to 20 appliances on one 428 mm sheet, or up to 7 with the included 7-Shot Reducing Plate. About 4 minutes per pull (7-Shot, PETG retainers), with seconds of hands-on time.
Temperature sensor and auto-levelling keep the sheet flat as it heats. No droop, consistent thinning, fewer remakes. One-tap replay of saved profiles.
120 / 125 / 428 mm blanks. 0.1 to 5 mm thick on the 428 mm sheet, 0.1 to 4 mm on the 7-Shot Reducing Plate. PETG, EVA, or keep buying what you already use. Mayku sheets cost $0.49 to $0.69 per appliance.
Temperature sensor and auto-levelling system keep the sheet perfectly flat as it heats. No drooping, no thinning, no remakes. Consistent fit across forms and across technicians.
The Multiplier takes 428 mm round sheets from 0.1 to 5 mm thick, and 120 mm and 125 mm round blanks from 0.1 to 4 mm thick on the 7-Shot Reducing Plate. PETG, EVA, and most other thermoformable sheets. Use Mayku stock or keep buying what you already use.
Material profiles come pre-installed. Dial in a custom profile for your material and your fit, save it, replay it in one tap. Same result every batch, every technician.
Connect to Wi-Fi for over-the-air firmware updates, new material profiles, and new machine functionality. The Multiplier on your bench in two years will do more than the one that arrived.
The Multiplier has an internal compressor and an air-out port. No external air line, no shop compressor plumbing. Drop it on any benchtop and run.
The Multiplier ships with both. Run a full 428 mm sheet for volume, or swap in the 7-Shot Reducing Plate for smaller runs on your existing stock. No extra purchase. No changeover hassle.
Both the full bed and the 7-Shot Reducing Plate are included in the Dental Bundle. Switch between them in seconds.
Also used for splints, positioners, space maintainers, and custom orthodontic appliances.
George Wheeler of Bridge Dental takes you through a full cycle (loading, forming, trimming) and answers questions from his bench. No slides, no pitch.
A short form on a separate page covers weekly volume, current method, materials, and outsourcing. We'll model hours saved, dollar savings, and payback period against $11,999. No sales call required.
Over 1,000 Multipliers in use across dental labs, packaging and product teams, universities, and studios.
"This has taken pressure forming to a new level. The more we scale, the more technicians we need, and this reduces that urgency."
"We're saving 5 hours each day, which adds up to over 1,200 hours per year. We can produce nightguards, retainers, aligners and bleaching trays in just a quarter of the time."
"I was looking for alternatives thinking I was going to have to buy some big industrial piece of equipment… I came across the Mayku stuff and I was like, 'oh my gosh, this is going to be perfect.'"
Everything to pull your first appliance the day it lands on your bench.
Free custom ROI report · your inputs · 48-hour turnaround.
