Watch a lab owner run the Multiplier. Live.
George Wheeler bought one. Put it on his bench. Now he'll show you exactly what it does, from his lab, in real time, with your questions answered.
Register for the Live Lab Session →Wednesday, May 6 · 12:30 PM ET · Free · Recording sent to all registrants
This isn't a product demo. It's a lab visit you don't have to drive to.
George runs Bridge Dental. He thermoforms retainers, night guards, sports guards and bleaching trays on the Multiplier every working day. In this live session, he'll show you:
Full cycle, start to finish
Sheet goes in, formed appliance comes out. No cuts. No fast-forwarding. You see exactly how long it takes and what the output looks like.
Multiple appliances per pull
The 7-shot adaptor plate lets George form up to 7 templates in a single cycle. See the throughput vs pulling one at a time.
Consistency you can trust
The Multiplier auto-levels the sheet throughout heating. George will show you what that means for fit and consistency.
Open materials
George uses his own stock. No proprietary sheets. He'll walk you through setting up a custom material profile in about two minutes.
George Wheeler
Owner, Bridge Dental Lab · DAMAS-accredited dental laboratory, Dorset, UK · Multiplier user for 2 years
"This has taken pressure forming to a new level. The more we scale the more technicians we need, this reduces that urgency."
George Wheeler, Owner, Bridge Dental Lab · Multiplier user for 2 years
"We're saving 5 hours each day, which adds up to over 1,200 hours per year. We can produce nightguards, retainers, aligners, and bleaching trays in just a quarter of the time."
Janine, Co-owner & Lab Manager, George Szekely
Built for labs like yours
This session is for US dental lab owners and managers who thermoform appliances (aligners, retainers, bleaching trays, night guards, sports guards) and are dealing with at least one of these:
- → Your existing thermoformer pulls only one template at a time and it's a bottleneck
- → You're outsourcing work you'd rather do in-house
- → You've looked at other pressure formers but they lock you into proprietary materials or cost 2–3× more
If none of that sounds like you, this probably isn't worth your time.
No pressure. Literally.
You register. You show up (or watch the recording). That's it.
If you want to go deeper, two things are on the table, both free, both optional:
Custom ROI Report
Fill in a short form with your lab's numbers. We send back what the Multiplier would save you: labour hours, outsourcing costs, throughput. 48 hours. Free.
1:1 with Ben
Co-founder and CPO. If you've seen enough and want to talk specifics (pricing, setup, materials, timelines), book a call.
See it run. Ask your questions. Decide for yourself.
Register for the Live Lab Session →Wednesday, May 6 · 12:30 PM ET · Free · Recording sent to all registrants